PDF File size: 2,9Mb Navigation Light Control System Download Brochure Products Subscribe to our newsletter here The Mega-Guard Navigation Light Control System (NLCS) controls up to 12 navigation lamps. The system has two outputs for each navigation lamp: a Main lamp output and a Spare lamp output. Each navigation lamp has its own on/off pushbutton. A number of navigation lamps can be grouped together (e.g. free sailing, towing) for simultaneous on/off control. Two versions of the Mega-Guard Navigation Light Control System are available to support the following lamp types: ● Bulb lamps; 19~32VDC ; maximum 60W. ● LED lamps; 19~32VDC ; maximum 60W. The lamps are continuously monitored for failures and the Spare lamp is automatically activated in case of failure of the Main lamp. The Navigation Light Control System is connected to a main and back-up supply and switches automatically to the back-up supply in case of failure of the main supply. A colour text sheet with a representation of the lay-out of the navigation mast is inserted in the front of the Navigation Light Control System in order to get a realistic on/off control of the navigation lamps. Features The Mega-Guard Navigation Light Control System consists of three items: ● Navigation Light Operator Panel Size: 144x144x55mm (WxHxD) for flush panel mounting. ● Navigation Light I/O Module Size: 127x198x29mm (WxHxD) for Din rail mounting. ● I/O Cable in between Nav. Light Operator Panel and Nav. Light I/O Module with a length of 3 or 5 meter. The Navigation Light Operator Panel is flush mounted in bridge console and contains the navigation light pushbuttons and a LCD display for display of diagnostic messages. The LCD display is also used to configure the system during installation. A menu driven interface is available for setting all parameters of the Navigation Light Control System. The Navigation Light I/O Module is DIN rail mounted inside bridge console and the navigation lamps and power supplies are directly connected to this module. In addition, the module is equipped with manual on/off switches for Main and Spare lamps. The I/O Module should be mounted in such a way that it can be reached without using tools in order to fulfill class requirements. The I/O Cable inter-connects the Navigation Light Operator Panel and the Navigation Light I/O Module.